Skip to content
Tel: +44 (0) 1305 264669
Precision Acoustics

Radiation force balance

Radiation force balance for diagnostic and therapeutic medical ultrasound

If you have any specific questions about this product, please contact us.

Radiation Force Balance

Overview

Radiation force balance for diagnostic and therapeutic medical ultrasound ultrasonic. Power is a primary acoustic quantity and its measurement is required by international standards for both diagnostic and therapeutic ultrasound systems. The ability to measure ultrasonic power accurately is vital to ensuring the correct operation and safe use of ultrasound in medicine.

A Radiation Force Balance (RFB) provides a means to directly measure the power produced by a source of ultrasound. It accomplishes this by means of a highly accurate micro-balance that is used to determine the acoustic radiation force that occurs when ultrasound is incident upon a highly absorbing target. The RFB from Precision Acoustics Ltd can be used to measure ultrasonic power from 10 mW to 100 W over a wide range of frequencies.

The RFB from Precision Acoustics Ltd can be used to measure ultrasonic power from 10 mW to 100 W over a wide range of frequencies.

Degassed water is recommended for all RFB measurements to minimise artefacts arising from bubble formation in the presence of high power fields. This is particularly important for the measurement of HIFU/HITU fields. The RFB tank for the low-frequency variant can be supplied with in-out hose connections on request. Precision Acoustics Ltd can also supply water treatment systems if required.

Radiation Force Balance with doors open

Key features

  • Two suspended target configurations:
    • High frequency target
    • Low frequency target
  • Integrated draft enclosure to minimise environmental artefacts
  • Customisable configuration (on request) to accommodate unusual transducer geometries
  • Automatic calculation of ultrasonic power and measurement uncertainty via bespoke software
  • Automatic calculation of focussing and absorption correction factors as specified in IEC 61161 within software
  • Typical type A (random) measurement uncertainties of 1% at powers >100 mW

Full range RFB specifications

Precision Acoustics RFB’s (High and low frequencies) are highly specified models suitable for the majority of medical diagnostic and physiotherapy ultrasound equipment: Using the suspended target the power generated by HIFU transducers can be measured.

  High frequency Low frequency
Target material F28P F48P
Max transducer diameter 100 mm 150 mm
Power range 10 mW to 100 W 10 mW to 50 W
Volume of water required 3.5 litres 17.5 litres
Measurement uncertainty ± 7% at 95% confidence level for powers > 50 mW
Frequency range 1 MHz to 20 MHz 200 kHz to 1.5 MHz

High frequency target

  • Calibration at 1 MHz and 3 MHz, powers: 1 W, 5 W and 10 W.
  • Calibration at 1 MHz and 3 MHz, powers: 1 W, 5 W and 10 W AND 3 outputs in the range 10 mW to 1 W at 0.928 MHz and 3.151 MHz AND 2 outputs in the range 10 mW to 200 mW at 5.287 MHz and 7.415 MHz and 9.541 MHz.

Low frequency target

  • Calibration 200 kHz to 1 MHz in 100 kHz steps at 1 W power